Connecting the touch using the computers bluetooth & PIN Code

Connecting the touch using the computers bluetooth & PIN Code

1. Goto bluetooth settings
2. Add a device
3. Select your touch device by serial number
4. Enter in 1234 as the pin
5. Run TestTouch and wait for it to find the touch 
6. Zero out the arm and exit
7. Run Spanesi Touch 1.1 (2 car icon)

    • Related Articles

    • Touch Arm isnt connecting

      Problem: Touch Arm isnt connecting to laptop Solution: 1. Check COM port 2. Check BT Key Light 3. Check BT USB Cord 4. Run TestTouch as Admin 5. Reset Touch.InI 6. Try connecting laptop to other touch, if it worked than the problem is the Bluetooth ...

    • How to Setup Touch Glasses and VNC Server

      Included in this thread there is a PDF on how to obtain the VNC server and get the Glasses connected.

    • Software states license is expired OR computers have changed

      Software license update This file should be downloaded when the following occurs: You have changed computers OR The software kicks out your license but it's still valid and within a year since you payed Click to download the update license file ...

    • 1 Point Coincidence TOUCH Arm Test

      1. Get touch connected and turned on 2. Open TOUCH Program 3. Goto "TEST" 4. Select Probe that you have on 5. Grab a piece of masking tape and put an X on it. 6. Place the piece of masking tape made in Step 5. on the Car, OR framerack, OR 2 post ...

    • Touch - Measuring with mechanical components removed.

      Measuring with mechanical components removed is very easy.  Read the attached document and learn how.