Touch Arm isnt connecting

• Related Articles

• 1 Point Coincidence TOUCH Arm Test

  1. Get touch connected and turned on 2. Open TOUCH Program 3. Goto "TEST" 4. Select Probe that you have on 5. Grab a piece of masking tape and put an X on it. 6. Place the piece of masking tape made in Step 5. on the Car, OR framerack, OR 2 post ...

• Touch arm sounds like its measuring the first point but will not proceed to the next point

  Problem: cannot get the touch to go from the very first measuring point to the second, and its making the measuring sound.  Solution: Exit out of everything and make sure that TestTouch is not open in the background                   if it is then ...

• Connecting the touch using the computers bluetooth & PIN Code

  1. Goto bluetooth settings 2. Add a device 3. Select your touch device by serial number 4. Enter in 1234 as the pin 5. Run TestTouch and wait for it to find the touch  6. Zero out the arm and exit 7. Run Spanesi Touch 1.1 (2 car icon)

• Touch - Measuring with mechanical components removed.

  Measuring with mechanical components removed is very easy.  Read the attached document and learn how.

• Touch Measuring System Tutorial Video

  Touch Measuring System Tutorial Video