Problem: cannot get the touch to go from the very first measuring point to the second, and its making the measuring sound. Solution: Exit out of everything and make sure that TestTouch is not open in the background if it is then ...
On January 22, 2018 at 2:28:10 PM, Timothy Morgan (tmorgan@spanesi-americas.com) wrote: CSA not required on the Touch. Components such as laptop, and charger are CSA compliant. Sent from my iPhone
1. Get touch connected and turned on 2. Open TOUCH Program 3. Goto "TEST" 4. Select Probe that you have on 5. Grab a piece of masking tape and put an X on it. 6. Place the piece of masking tape made in Step 5. on the Car, OR framerack, OR 2 post ...