Arm wont align to vehicle

• Related Articles

• Touch arm sounds like its measuring the first point but will not proceed to the next point

  Problem: cannot get the touch to go from the very first measuring point to the second, and its making the measuring sound.  Solution: Exit out of everything and make sure that TestTouch is not open in the background                   if it is then ...

• Touch Arm isnt connecting

  Problem: Touch Arm isnt connecting to laptop Solution: 1. Check COM port 2. Check BT Key Light 3. Check BT USB Cord 4. Run TestTouch as Admin 5. Reset Touch.InI 6. Try connecting laptop to other touch, if it worked than the problem is the Bluetooth ...

• 1 Point Coincidence TOUCH Arm Test

  1. Get touch connected and turned on 2. Open TOUCH Program 3. Goto "TEST" 4. Select Probe that you have on 5. Grab a piece of masking tape and put an X on it. 6. Place the piece of masking tape made in Step 5. on the Car, OR framerack, OR 2 post ...

• Touch Measuring - Adding An External Point To A Vehicle

  To add an external measurement point in the Touch Measuring Software, perform the following steps: - Select "Functions" - Select "External Points" - Select "External Points" For more information, please download the Touch Measuring System manual and ...

• Touch is giving random readings

  Problem: Touch Arm is giving random readings Solution: Test the arm (via Check arm coincendence)